Copy Output (Specifying Finishing Options) - Fuji Xerox ApeosPort-V 5070 User Manual

3 Copy
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.114).
Handout Tray
Allows you to select the paper tray to be used for the handouts.
Select [More] to display the [Paper Supply - Handout] screen on which you can select a tray.
Note
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.114).

Copy Output (Specifying Finishing Options)

This feature allows you to select finishing options.
Note
3
If any finisher (optional) is installed, each set of copies can be stapled and then output
If the 2/4 Hole Punch Kit or US 2/3 Hole Punch Kit for Finisher-B1, or 2/4 Hole Punch Kit or
US 2/3 Hole Punch Kit for C3 Finisher (optional) is installed, the output can be punched.
If the Folder Unit CD1 (optional) is installed, the output can be Z-folded.
Waste staples may come out with output paper. Be careful not to get injured by
the staples.
Do not staple punched holes of paper. Sharp points of a staple may cause
injuries.
1
Select [Copy Output].
2
Select any option.
Auto
Copies are collated when the originals are
loaded in the document feeder.
Copies are also collated when originals are
loaded on the document glass and any of the
following features is used: 2 Sided Book
Copying, Covers, [Blank Separators & Handouts]
or [Transparency Set & Handouts] of Transparency Options, Booklet Creation, Stapling,
Build Job, Sample Set, and Combine Original Sets.
154
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator &
Handout] at the same time.
• When you use the bypass tray, select [Bypass] on the [Paper Supply - Handout] screen. Select an
option other than [Auto Detect] for [Paper Size] on the [Tray 5] screen.
• For [Handout Tray], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Handout Tray] at
the same time.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
CAUTION