Fuji Xerox ApeosPort-V 5070 User Manual page 135

1
Use [+] and [-] or the numeric keypad to specify
a binding shift value.
[Booklet Creation - Divide Output] Screen
When you have a large number of originals, the originals are divided to create subsets to
reduce the thickness of each booklet. The machine folds copies in half, and piles them up to
form a booklet.
You can specify the number of sheets in the range from 1 to 50 in 1 sheet increments.
Note
1
Select [On].
2
Specify the number of sheets per subset using [+] and [-] or the numeric keypad.
[Booklet Creation - Fold & Staple] Screen
When the Booklet Maker Unit for Finisher-B1 (optional) or the C3 Finisher with Booklet
Maker (optional) is installed, [Fold Only] and [Fold & Staple] become available.
1
Select any option.
Off
No finishing is carried out.
Fold Only
When the Booklet Maker Unit for Finisher-B1
(optional) is installed:
The copies are creased in half. The number of copies that can be creased is up to 5. When
the number is more than 5, the document is divided by every 5 sheets.
When the C3 Finisher with Booklet Maker (optional) is installed:
The copies are folded in half. The number of copies that can be folded is up to 5. When
the number is more than 5, the document is divided by every 5 sheets.
Fold & Staple
When the Booklet Maker Unit for Finisher-B1 (optional) is installed:
The copies are creased in half and stapled at the center. The number of copies that can
be creased and stapled is 2 to 15.
When the C3 Finisher with Booklet Maker (optional) is installed:
• When you specify the stapling feature, specify the dividing number of sheets in the range from 1 to
15.
Output Format
3
135