Marks/Waypoints List - Standard Horizon CP180 Owner's Manual

4. Press [ENT] ([CLR] to abort the move), the Waypoint appears in the new position.
7.2

MARKS/WAYPOINTS LIST

The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the
GPS Chart Plotter. This page also allows you to:
ICON Sorts by icon type. Selections are:
a. SELECT : only User Points with the selected icon are shown
b. ALL
FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob.
LOCATE Shows the position of a Mark or Waypoint on the Chart page.
EDIT Edits a previous stored Mark or Waypoint.
SORT Sorts the name of User Points. Selections are:
a. A-Z ASCENDING
b. Z-A DESCENDING
NEW MARK Enters in Marks, editing icon type and position.
MODE Controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW
b. ICON
c. HIDE
d. SHOW ALL : all Marks or Waypoints are shown
e. ICON ALL : all icons are shown without name
f. HIDE ALL
DELETE* Opens a window with two options:
a. DELETE SELECTED : deletes the selected point
b. DELETE ALL
SEND** Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE sentences.
RECEIVE** Receives points from an external device (PC) that is capable of sending NMEA WPL sentence.
GPS Chart Plotters
Figure 7.1.1 - Moving Mark or Waypoint (1)
Figure 7.1.1a - Moving Mark or Waypoint (2)
: all User Points are shown
: sorts the name of the Mark or Waypoint in ascending order
: sorts the name of the Mark or Waypoint in descending order
: icon and name are shown
: only icon (no name) is shown
: Mark or Waypoint is hidden
: all Marks or Waypoints are hidden
: deletes all stored points
Page 61