Marks/Waypoints List - Standard Horizon CP500 Owner's Manual

Press [ENT] ([CLR] to abort the move), the Waypoint appears in the new position.
7.2

MARKS/WAYPOINTS LIST

The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the
CP500. To obtain the List page:
1. Created a Mark.
2. Place the cursor over the Mark, press [L
This page also allows you to:
ICON Allows sorting by icon type
FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob
LOCATE Shows the position of a Mark or Waypoint on the Chart page
EDIT Allows you to edit a previous stored Mark or Waypoint
NEW MARK Allows entering in Marks, editing icon type and position
MODE This selection controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW - icon and name are shown
b. ICON - only icon (no name) is shown
c. HIDE - Mark or Waypoint is hidden
d. SHOW ALL - All Marks or Waypoints are shown
e. ICON ALL - All Icons are shown without name
f. HIDE ALL - All Marks or Waypoints are hidden
DELETE Allows deleting the selected point.
DEL ALL Allows deleting all stored points.
SORT Sorts the name of the Mark or Waypoint in ascending or descending order
SEND Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE sentences.
RECEIVE When selected, receives points from an external device (PC) that is capable of sending NMEA WPL sentence.
The SEND and RECEIVE functions are usually used by navigation programs running on a Personal
Computer.
CP500
Figure 7.1.1a - Moving Mark or Waypoint (II)
].
IST
NOTE
Figure 7.2 -Example of Marks/Waypoints List
Page 45