Table of Contents
Advertisement
4. Press [ENT] ([CLR] to abort the move), the Waypoint appears in the new position.
7.2
MARKS/WAYPOINTS LIST
The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the
CP590. To obtain the List page:
1. Created a Mark.
2. Place the cursor over the Mark, press [L
This page also allows you to:
ICON
Allows sorting by icon type. Selections are:
a. SELECT - Only User Points with the selected icon are shown
b. ALL - All User Points are shown
FIND
Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob
LOCATE
Shows the position of a Mark or Waypoint on the Chart page
EDIT
Allows you to edit a previous stored Mark or Waypoint
NEW MARK
Allows entering in Marks, editing icon type and position
MODE
This selection controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW - icon and name are shown
b. ICON - only icon (no name) is shown
c. HIDE - Mark or Waypoint is hidden
d. SHOW ALL - All Marks or Waypoints are shown
e. ICON ALL - All Icons are shown without name
f. HIDE ALL - All Marks or Waypoints are hidden
DELETE
Allows deleting the selected point.
DEL ALL
Allows deleting all stored points.
SORT
Allows sorting the name of User Points. Selections are:
a. A-Z ASCENDING - Sorts the name of the Mark or Waypoint in ascending order
b. Z-A DESCENDING - Sorts the name of the Mark or Waypoint in descending order
CP590
Figure 7.1.1 - Moving Mark or Waypoint (I)
Figure 7.1.1a - Moving Mark or Waypoint (II)
IST
].
Page 61
Advertisement
Table of Contents
