Table of Contents
Advertisement
5.5 Spot monitor
In addition to the main monitor, you can connect an additional spot monitor which
enables you to view additional channels independent from the main monitor.
Procedure:
Press the [SPOT] button on the remote control and then press the number of the
camera you wish to see in full screen.
Press the [SPOT] button twice to toggle between the two cameras. The interval
between the two cameras is described in section "Sequence setting."
If an alarm has been triggered, the corresponding channel is displayed as full
screen.
Press the [ESC] button to exit the spot function.
_____________________________________________________________________________
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
- 34 -
User manual
Advertisement
Table of Contents
