System; General - Santec SanStore-4LEMX User Manual

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX

7.8 System

7.8.1 General

Control ID:
Each DVR that is preconfigured with the control ID, can be operated by the remote
control. To select the DVR to be controlled with the remote control, press and hold the
DVR ID button. While holding the DVR ID button, press the appropriate DVR ID number.
Eample:
Enter "05" for DVR ID 05, enter "43" for DVR ID 43, and so on. If you enter "00", all
DVRs – irrespective or their ID – will be controlled at the same time.
DVR Name:
Assign a name to the DVR, especially when you have several DVRs in the network.
Key tone:
By default, the DVR emits a beep every time a button is pressed. Set the key tone to
"OFF" to turn the button beep off. Default setting is "ON"
Auto logout:
You can configure the DVR to automatically log out users. Default setting is "OFF".
[OFF  1 minute  3 minutes  5 minutes  10 minutes]
SMART monitor:
Turn ON or OFF to display HDD information.
Key sensitivity:
Set the sensitivity of the keys on the DVR front panel.
PB Deinterlace (only for LEMX series):
 ON: Reducing image flickering but less picture quality.
 OFF: Better picture quality for still image but having flicker for moving pictures.
_____________________________________________________________________________
- 76 -