Page 1
USER MANUAL SanStore digital video recorder Models: SanStore 4/8/16-LEMX SanStore 4/8/16-LMX SanStore LEMX series SanStore LMX series Version 2.1sfi/0813/engl/A5...
Page 2
Errors excepted. Specifications are subject to change without notice for quality improvement. SANTEC is a registered trademark of SANTEC BW AG. All other companies or products mentioned in this publication are trademarks, registered trademarks or brands of the respective company.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Table of contents 1. PREFACE 1.1 Description of symbols 1.2 Safety instructions and precautions 1.3 Important general note 1.3.1 Assembly and installation 1.3.2 Maintenance and repair 1.3.3 Spare parts and accessories 1.4 Items included in the delivery...
Page 4
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.4 Schedule 7.4.1 Chart setup 7.4.2 Holiday setup 7.5 Disk 7.5.1 Disk manager 7.5.2 Recording disk (HDD) 7.5.3 SMART status 7.6 Network 7.6.1 Ethernet 7.6.2 General 7.6.3 E-mail 7.6.4 SMTP...
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 1. PREFACE Please read this user manual carefully before starting to operate this device. Please retain this user manual for future reference. 1.1 Description of symbols Caution: Danger to life! In the text, this sign symbolises life-threatening voltages which may lead to damages to humans and to material.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 1.2 Safety instructions and precautions Caution: Overcharge Never expose the power socket or the power cord to electrical overcharge. This may lead to fire and life-threatening shocks. Caution: Thunderstorms...
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 1.3 Important general note Please read the following instructions carefully. 1.3.1 Assembly and installation On-site installation should only be performed by qualified maintenance personnel and must meet local specifications and regulations.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Attention: Opening the appliance will result in loss of warranty. Do not try to repair the appliance yourself but contact your local distributor or specialist. For digital recorders, it is mainly the HDD which subject to natural attrition. HDD attrition may happen after approx.
All other companies or products mentioned in this publication are trademarks, registered trademarks or brands of the respective company. They are not connected in any way with SANTEC BW AG. Proprietary rights are with the respective manufacturers or brand owners. Illustrations and pictures in this user manual are for better understanding only and may differ from the actual product design.
Page 11
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 1. Mode indicator: 3 LEDs to display the status of the recorder: Blue: Power is on. Green: HDD is on. Red: Recording is on. 2. Playback/Recording: These functions are used in live mode or playback mode.
Page 12
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 3. Menu/ESC-button Menu: Press this button to display the main menu screen. Press this button to exit the menu without saving. 4. Enter/10+ button Enter : Press this button to save menu settings or to select channels over 10.
Page 13
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 10. Time search and minus button Press this button to access the calendar and the time search menu. This button is also used to change channels or to decrease values in the setup menu.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 2.2 SanStore LMX series 2.2.1 Front panel 1. Status LED 3 LEDs indicate the status of the video recorder: Green: Recoder is operating Red: Recording in process Blue: Power on 2.
Page 17
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Reverse / Fast Rewind: In still mode, this button is used to move reverse picture by picture. In playback mode, this button is used to fast rewind. Forward / Fast Forward: In still mode, this buttons is used to move forward picture by picture.
Page 18
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 6. Nnumeric buttons 1-10 These buttons have several functions: Enter numbers/numerical data (e.g. when prompted for a password) Select channels/cameras Choose the day in the schedule function Enter letters to mark channels Press this button to choose channels >10.
Page 20
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Connections: 1. Power: DC power jack 2. Sensor (alarm in 1-4): For connecting alarm inputs 3. Relay (alarm out 1): For connecting alarm out relays. 4. RS-422/485: For connecting a PTZ camera and/or a keyboard.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 2.3 Remote control Note: DVR ID button: Set the proper DVR system ID through which to operate. Press the ID button, and then press the number button within two seconds to select the system ID of the DVR. If you set the system ID to zero, you can control multiple DVRs at the same time.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 2.4 Mouse control You can control the recorder using the mouse. 1. Left button: Double-click on any channel to enlarge to full screen while in a split-screen display mode.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 2.5 Virtual keypad for mouse control This DVR provides a virtual on-screen keypad to perform the control by mouse. Connect a mouse via the USB port before use.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 3.2 Camera connection 4 / 8 / 16 cameras can be connected tot he video inputs (BNC) on the recorder’s rear panel. To connect a PTZ camera, please connect the control line of the PTZ camera to the RS-422 TX+, RS-422 TX- terminal and connect the video output on the recorder’s...
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 3.5 PC requirements for network connection Minimum Recommended Windows XP SP3 or higher Windows 7 Processor (CPU) Core2 Duo Memory (RAM) PCI-E 256M PCI-E 512M DirectX DX9.0 Support DX9.0 Support...
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 4. QUICK START Press the POWER button on the recorder’s front panel or on the remote control to switch the recorder on. The live-view image appears after approx. 30 seconds.
Page 28
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Time & date setting: When the DVR is powered on for the very first time, please enter the correct date and time. Use the mouse or the direction buttons to selec the „Time“ tab in the system menu.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 5.LIVE VIEWING 5.1 Display overview 1 Bildschirm-Übersicht Recording mode Camera number Event and camera title Status bar Recording Mode The background colour of the number will be different based on the recording status.
Page 30
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX (1) (2) (3) (4) (5) (6) (7) Status bar (1) Indicates the recording status. Red means that the event is currently recorded. Click on this symbol to toggle between recording start and stop.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 5.2 Multi-screen display and sequencing 5.2.1 Screen display Select any camera for full screen display by pressing the number button of the desired camera. Alternatively, double-click on the camera window to display it as full screen.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 5.3 Quick buttons for multi-screen display 1. Press F1 button on the remote controller + <Number>. For example, press F1 button then number 8. The eight channel view mode will be displayed.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 5.4 Zooming During live view mode, it is possible to zoom into a section of the screen to get a close- up view of the screen. To activate the digital zoom, select the full screen display of the camera you wish to zoom.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 5.5 Spot monitor In addition to the main monitor, you can connect an additional spot monitor which enables you to view additional channels independent from the main monitor.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 6. OPERATION 6.1 Login/Logout You must log on to the DVR with valid password to operate the DVR. By factory default, it comes with the login account “ADMIN” and the default password “000000”.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 6.2 Menu navigation 1. Log on to the DVR as “ADMIN” or as user (on configure level). As a user on configure level, the access is limited (disk and system menu).
Page 37
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 6. The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the direction buttons [ 7.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7. SETUP 7.1 Display 7.1.1 General The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the direction buttons You can change the below options using the [ - + ] buttons.
Page 39
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX ITEM ADJUSTMENT Select “show” or “hide” to define whether the below status bar should be displayed on the main monitor or not. STATUS BAR Select on-screen-display information for camera number and title.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.1.2 Switch setup (monitor configuration) 1. The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the direction buttons [ 2.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Split mode: Select the desired sequence mode display. Note: This function is limited to the spot monitor. Used channel: Select the cameras to be included or excluded from the automatic switching.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.2 Camera Configure the properties of the camera. LEMX series: LMX series: 1. Press left/right buttons [ ] or the numeric buttons or the mouse to select the desired camera.
Page 43
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Depending on your “category” selection, either “grid” or “tune” (only for LEMX series) is displayed with the following setting options: Grid: Sensitivity: The camera sensitivity can be adjusted using either the [ + - ] buttons or the mouse.
Page 44
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Tune: ITEM DEFAULT ADJUSTMENT The brightness of each camera can be adjusted by pressing the BRIGHTNESS [-,+] buttons. Alternatively, use the mouse. The contrast of each camera can be adjusted by pressing the CONTRAST [-,+] buttons.
Page 45
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Camera title: You can create a unique name for each camera, respecting the following guidelines: Characters: A to Z. Special characters are supported by network. Numbers: 0 to 9.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.3. Record 7.3.1 General 1. The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the direction buttons [ 2.
Page 47
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 3. To save changes and exit the menu, click on “SAVE”. To exit the menu without making changes, press the [CANCEL] button. Alternatively, close the window by clicking the cross.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.3.2 Resolution and recording speed setting The DVR records each camera indivually and then multiplexes them. You can set the resolution and the recording speed for each channel individually.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.3.3 Continuous recording The DVR comes with certain preset settings from the factory. Therefore once the DVR is installed, immediate recording is possible after pressing the [REC] buttons By default, audio alarm and motion recording are OFF.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.3.4 Event recording On the “Day event” tab, you can define the parameters for alarm, motion detection and video loss. Alarm recording: One alarm input can be configured to one channel. One camera channel can be assigned to multiple alarm inputs.
Page 51
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Motion recording: One motion detection can be configured to one channel. One camera channel can be assigned to multiple motion detections. Press the [-, +] buttons or the mouse to change the value or select options.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Event edit Press [ENTER] to edit multiple events. The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the direction buttons [ ] on the remote control or the front panel.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.4 Schedule When the schedule is on, users may define their own time as well as specified date settings. A schedule is used to record selected cameras with different times, recording rates, alarm or event.
Page 54
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 1. A cursor (highlighted menu) can be moved using the direction buttons [ 2. Select the day you wish to edit. Press [ENTER] or use the mouse. 3. A window shows the selected day.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.4.2 Holiday setup This allows you to create up to 32 holidays. If a holiday occurs on the same date as a weekday, the holiday schedule will override the weekday schedule.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.5 Disk 7.5.1 Disk manager The Disk Manger is used to format hard disk and to assign the HDD usages such as back up or mirroring. 1. Select The menu displays all installed HDDs with different options.
Page 57
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 2. Action: None: Default setting. Assign to stream disk: Initialise the selected HDD. It formats the drive and all data on the drive is erased. External SATA HDD can be used to extend HDD capacity. The selected HDD will be moved to [Recording Disk] after formatting.
Page 58
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Device CD/DVD±R CD/DVD±RW SATA can be formatted can be formatted on a PC using FAT 32/NTFS file system must be formatted on DVR before backing up or exporting data to the...
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.5.2 Recording disk (HDD) This information lists the installed drives and their respective capacities which are currently used for recording. Size, range: It displays the currently recorded data size, the HDD size, the stored data range and the status of the recording.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.5.3 SMART status It displays HDD information such as bad sector, temperature or HDD running time. SMART information may be slightly different, depending on the HDD manufactures. It is recommended to exchange the HDD when the HDD status “Pre-fail” is indicated.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.6 Network The IP address can be set as static or as dynamic. The static service consists of an IP address that remains constant for the duration of the contract of the internet service.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.6.2 General LEMX series: LMX series: Access port: Select a value from 0001 to 9999. Enter the port number that the client will use to communicate with the DVR over the Internet.
Page 63
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Auto port FWD: Click on “Insert” to automatically open ports for router communication with UPNP compliance. 2 Way Audio: The function „2 Way Audio“ between recorder and EMS software is supported.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.6.3 E-mail This DVR allows you to specify the events that generate a notification. An e-mail notification can be sent if an event occurs, e.g. alarm or motion detection.
Page 65
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX E-mail source: An event has to be specified by notification options. Event edit: Notifications can be enabled for each channel for alarm, motion, video loss and system (HDD failure, record failure, HDD full, etc). Press the [ - + ] buttonor the mouse to select.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.6.4 SMTP This menu will be activated when you check “SMPT” in the e-mail settings. Server: Enter the e-mail server name or the IP address. Use the virtual keyboard or press the appropriate numeric button on the remote control or the front panel.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.6.5 DDNS (Dynamic DNS) The menus are displayed with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the direction buttons ] or the mouse.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX DYNDNS: To use your own domain name service or “dyndns.com” The following settings are only needed if you are NOT using the “Default” mode: Domain name: Enter the name you have used for the DDNS web configuration.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.6.7 Router and port forwarding The majority of networks often consist of a single IP address which shares the Internet access through a router. This IP address may be any external (public) static IP address or any dynamic IP address issued by the Internet service provider.
Page 70
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 1) Connections: LAN: Connect via local IP. If you are connecting within your network, you only need to enter the IP address of the system (ex. 192.168.0.50) WAN: Connect via DDNS.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.7 Device 7.7.1 General This DVR support 4, 8 or 16 channels (depeding on the model) for audio, alarm inputs 4 relay outputs. A HDMI output is supported, too.
Page 72
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 2) Audio Record: Set the audio recording to “ON” or “OFF”. The audio data is always recorded in real-time whereas the video data can be recorded in various modes including real- time.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.7.2 Alarm This DVR support 4, 8 or16 (depending on the model) alarm inputs and 4 relay outputs. One alarm input can be configured to one relay output.
Page 74
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Change the below options using the [ - + ] buttons on the remote control. The following system events can be used: HDD disk failure Record system failure Temperature warning.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.7.3 PTZ event If an event is triggered by an alarm, motion or video loss, this DVR sends a preset command to the PTZ camera. PTZ option must be enabled and a protocol must be assigned to the camera channel.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.8 System 7.8.1 General Control ID: Each DVR that is preconfigured with the control ID, can be operated by the remote control. To select the DVR to be controlled with the remote control, press and hold the DVR ID button.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.8.2 Time Make sure to set up your date and time prior to start recording. ] to select the tab menu “Time”. The menus are displayed Use the left/right buttons [ with options on the left-hand column and settings in the right hand column.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.8.3 Account ] to select the tab menu “Account”. The menus are displayed Use the left/right buttons [ with options on the left-hand column and settings in the right hand column. A cursor (highlighted menu) can be moved using the direction buttons [ ].
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.8.4 Update 1. Download the latest firmware file and copy it to a USB Flash memory stick in the root directory. 2. Connect the USB stick into one of the USB ports. If you are currently recording, please stop the recording.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 7.8.5 Info No adjustments can be made here but only system information is displayed. Press the [INFO] button on the remote control or on the front panel. The system information is displayed.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 8. PAN/TILT ZOOM (PTZ) CONTROL PTZ control is available to support dome cameras. The PTZ option must be configured for each camera channel. The layout of the PTZ interface is identical to the layout of the front of the DVR or the remote control.
Page 82
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Control via mouse: Using the mouse, the PTZ menu and control box are displayed as shown below. Use the mouse cursor instead of the direction buttons to move around.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 8.2 Preset and tour Button Function Set the preset position. Press the [SPOT OUT] button on the remote control. Move the PTZ camera into the desired position. Press the [Preset] button.
Page 84
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Tour Group A pre-defined tour group allows a camera to move through a programmed sequence of PTZ presets. 1) Communication settings. Configure the appropriate camera model by entering the ID and the corresponding Baud rate.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 8.3 Custom functions Button Function First PTZ custom function: [DISPLAY] button on the remote control Second PTZ custom function: [ZOOM] button on the remote control Third PTZ custom function: [PTZ] button on the remote control 8.4 Auto pan, auto tilt, power...
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 9.PLAYBACK / SEARCH The DVR supports 2 playback modes: playback and search. The DVR offers a variety of search functions which enables you to quickly and efficiently locate and review a specific period of time in the database.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 9.2.2 Preview search (single channel playback) The DVR allows you to quickly review a single channel of playback over a period of day, hour and minute. Press the [Time Search] button to access the time search table.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 9.2.3 Recorded event search The recorded event search feature allows you to search for recorded video by event. 1. Click on “Event Select” 2. Press [ENTER]. Press the [ - + ] buttons or use the mouse to select the event.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 9.2.4 Event source search The event source search feature allows you to search for a triggered event (alarm, motion, video loss). 1. Select “Motion Area” to search for a specific area.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 9.3 Go to search 1. Press the [Time Search] button for 2 seconds. The time input menu will pop up. 2. Set the date and time (start and end) you wish to search.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 9.4 Log list search The logs can be used to search and review a point in time of the recorded data. Alarm, motion, video loss and system related logs can be searched and played back directly from the time of the incident.
Page 92
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Detailed log information: icon means that there is more detailed information available. Press the [INFO] button. A window with detailed information will pop up: _____________________________________________________________________________ - 92 -...
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 10.BACKUP 10.1 Manual backup 10.1.1 Internal CD/DVD-R/W drive (only for LMX series) Note: The backup process to the CD-RW and DVD-RW only works in manual backup mode due to the limited capacity of the medium.
Page 94
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX The progress of the backup will be displayed at the bottom of the window as percentage of the entire backup process. Please note that the CD/DVD-RW icon’s colour will be blue to signify that backup is in progress. The OSD will disappear by pressing [CANCEL] button.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 10.1.2 USB memory stick The backup process for an external USB memory stick is identical to the one described before for the CD/DVD-RW backup. To read the USB backup, please use FAT32 or NTFS formats.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 10.2 Auto backup via FTP-server 1. Use the [ - + ] button to select the device “FTP”. 3. Use the direction buttons to alter the FTP settins.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 10.3 Log list backup 1. Plug-in the USB memory stick to the USB port. 2. Press the [LOG] button to see the log list of the DVR. 3. Press the [BACKUP] button to save the log list to the USB memory stick.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 11. Remote access via the Internet Explorer You can access your SanStore recorder via the Internet Explorer. 11.1 IP address Open the Internet Explorer. As URL, enter the IP address of the recorder: Example: http://192.168.0.251:7000...
Page 99
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX If you access the recorder via the Internet Explorer for the first time, click on „add-on“ so that the plug-in is loaded. Click on „install“. The recorder display appears.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 11.3 Recorder playback After the ActiveX plug-in has been installed, the following screen pops up: 1. Main camera display window: A live video or a playback video is displayed for 4/8/16 cameras (depending on the recorder model).
Page 101
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 4. Setup: Opens the recorder menu to adjust the settings. 5. Capture (Snapshots): You can take a snapshot from a live picture or from the playback video. These images will be saved in JPEG or BMP format.
Page 102
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX Pan/tilt direction buttons Pan and tilt. Zoom in Zoom in. Zoom out Zoom out. Focus Focus near. Focus far. Auto-focus. Iris Iris close. Iris open. Auto iris. Preset and tour Save preset.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 11.4 Live mode 1. Camera title 2. Time 3. Recorder status REC: Normal recording Wait: Wait for initial connection Loss: Video loss Close: Disconnected from recorder Alarm: Alarm recording...
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 11.5 Remote playback Click on „Remote Search“ The following window pops up. Select the date and the time and then clikc on “Play” to start the playback. 1. Year and month 2.
Page 105
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX During playback mode, you can click on „hour“ or „minute“ or „clip“ at any time to scrol forwards or backwards. You can also changethe playback speed. 1. Camera title 2.
User manual SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX SanStore-4LMX / SanStore-8LMX / SanStore-16LMX 11.6 Download To download a file, click on „download“ instead of on „play“ (as described in the previous chapter). The download window pops up. The begin, the end and the current time are indicated.