Table of Contents
Advertisement
User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
7.7.2 Alarm
This DVR support 4, 8 or16 (depending on the model) alarm inputs and 4 relay outputs.
One alarm input can be configured to one relay output.
One relay output can be assigned to multiple alarm inputs.
Use the left/right buttons [
options on the left-hand column and settings in the right hand column. A cursor
(highlighted menu) can be moved using the direction buttons [
Input:
Change the input type. Use the [-, +] button to change the values.
Output:
You can configure how the relay outputs are controlled: automatically or manually.
Use: Change the output type.
Inactive:
a. Event (automatic): Relay out is turned off when the event expires. This setting
is configured globally.
b. Manual: Relay out is turned off from this menu (Control).
Event Edit
Press [ENTER] to edit multiple event. The menus are displayed with options on the
left-hand column and settings in the right hand column. A cursor (highlighted menu)
can be moved using the direction buttons [
front panel.
_____________________________________________________________________________
] to select the tab "ALARM". The menus are displayed with
- 73 -
] or the mouse.
] on the remote control or on the
Advertisement
Table of Contents
