Record; General - Santec SanStore-4LEMX User Manual

7.3. Record

7.3.1 General

1. The menus are displayed with options on the left-hand column and settings in the
right hand column. A cursor (highlighted menu) can be moved using the direction
buttons [
2. Change the below options using the [ - + ] buttons.
Schedule use:
This enables or disables the night zone. By default it is set to "OFF".
Bootup record:
It starts recording without pressing [REC] button when it set "ON".
Disk overwrite:
Select the record policy of the hard disk drive.
- ON: By default, the hard disk drive will overwrite from the beginning
- OFF: It stops recording after HDD is full.
Auto delete:
Allows you to configure when the DVR automatically deletes all data from
the HDD. You can choose from the following options.

None
Pre-record:
Determines how long the recording prior to an event should last:
5-300 sec. By default it is set to 5 sec.
Post- record:
Determines how long the recording after to an event should last:
5-300 sec. By default it is set to 10 sec.
Note:
The alarm/motion recording will be extended if there is another
alarm/motion detection during the event recording.
_____________________________________________________________________________
] .
when it becomes full (ring buffer).

12 hours 1 day - 6 days
- 46 -
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX

1-4 weeks-> 30 days
User manual