Table of Contents
Advertisement
User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
7.8.3 Account
] to select the tab menu "Account". The menus are displayed
Use the left/right buttons [
with options on the left-hand column and settings in the right hand column. A cursor
(highlighted menu) can be moved using the direction buttons [
]. Press the [-, +]
button to change the values. Alternatively, use the mouse.
User/Name:
The DVR comes preconfigured with ADMIN. Select a user 1-5, and then activate it.
Name length: up to 10 characters
Characters: A to Z (no special characters), numerals 0 to 9
Privilege:
The admin user can define each user's privilege such as playback, PTZ control, backup,
configuration (except for disk and system), recording stop, system shutdown.
Network PWD:
The DVR comes pre-configured with a system password to either enable network
access for the administrator or to deny access for users. It is possible to create different
passwords for network access.
Password length: up to 10 characters.
Characters: A to Z (no special characters), numerals 0 to 9.
Usable channel:
Each user can be assigned to specific cameras.
System password:
Enter the 6 digits for the new password, and then re-enter the same password in the
"confirm" section. The asterisks represent each entered character.
To save changes and exit the menu, press the [MENU] button or click "SAVE".
To exit the menu without making changes, press the [CANCEL] button. Alternatively,
close the window by clicking the cross.
_____________________________________________________________________________
- 78 -
Advertisement
Table of Contents
