Table of Contents
Advertisement
9.PLAYBACK / SEARCH
The DVR supports 2 playback modes: playback and search. The DVR offers a variety of
search functions which enables you to quickly and efficiently locate and review a specific
period of time in the database. You can search for date/time, event and log.
9.1 Playback
When the [PLAY] button is pressed, the DVR starts to playback any recorded data from
the latest data. When the DVR reaches the end of the recorded data, it will stop the
playback.
During playback, the DVR may be played back in reverse, paused, speed search with up
to 16 times the normal speed, or move picture by picture.
9.2 Time search
9.2.1 Multi channel playback
1. Press the
day will be displayed. The data are colour-coded by category:
red = event
yellow = normal
2. Use the [ - + ] button to navigate between day and hour. If you use the
mouse, work with the wheel.
Note:
Use the [PLAY] button to move at the end of the data.
Use the [REWIND] or [FF] button to move to the next page.
3. To review all channels, press the [ENTER]. Using the mouse, double click.
4. The DVR will start the playback mode, displaying all 16 channels. Any
channel number or the [DISPLAY] button may be pressed to change the
display mode.
_____________________________________________________________________________
T
[Time Search] button to access the time search table. The
- 86 -
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
User manual
day, hour, minute
channel
Advertisement
Table of Contents
