Continuous Recording - Santec SanStore-4LEMX User Manual

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX

7.3.3 Continuous recording

The DVR comes with certain preset settings from the factory. Therefore once the DVR is
installed, immediate recording is possible after pressing the [REC] buttons By default,
audio alarm and motion recording are OFF.
The DVR records video data continuously over a 24 hour period. Different settings can
be configured for each camera. To copy the setting from one channel to another, press
the [Display] button.
Item
RES Indicates the selected resolution.
AUDIO Select whether audio data should be recorded.
F/S Select the recording speed for each camera.
Specify the picture quality of the recording for each camera.
QUALITY
ultra  super  high  middle  low
Continuous recording may be done at the same time as event recording. The DVR
records video data for 24 hours. If, however, an event occurs, the recording speed and
the picture quality can be set differently as the continuous recording.
Example:
Note:
Please define the event source (motion, alarm, video loss) in the "Day event" tab.
_____________________________________________________________________________
Adjustment
If you press the [REC] button, normal recording
starts with a high picture quality of 3 fps. If an event
is triggered on this channel, the recording speed is
increased to max. 25 fps. As soon as the event is
over, the normal recording continues.
- 49 -