Table of Contents
Advertisement
User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
7.8.2 Time
Make sure to set up your date and time prior to start recording.
] to select the tab menu "Time". The menus are displayed
Use the left/right buttons [
with options on the left-hand column and settings in the right hand column. A cursor
(highlighted menu) can be moved using the direction buttons [
]. Press the [-, +]
buttons or the mouse to change the values.
Time zone:
Select the time zone in which the DVR is located. The DVR contains DST setting
(Daylight Saving Time). If you choose a time zone with DST, there is no change in the
system time stamp for recorded data. When the Daylight Saving Time ends, the DVR
automatically adjusts the time.
Date format:
Select the format to display the date:
MM/DD/YYYY DD/MM/YYYY YYYY/MM/DD
NTP synchronisation:
The internal time of the DVR can be synchronised with an external time source using
NTP (Network Time Server). If the NTP option is ON, the date and rime option are
inactive.
NTP server:
Allows you to use a public or private NTP server. Enter the IP address of the sever or
the domain. The default setting for a public server is "pool.ntp.org".
Note: Time synchronization intervals: min. 64 sec, max. 1024 sec
NTP test:
Test whether the NTP server works properly.
Date and time:
Set the current time and date.
To save changes and exit the menu, press the [MENU] button or click "SAVE".
To exit the menu without making changes, press the [CANCEL] button. Alternatively,
close the window by clicking the cross.
_____________________________________________________________________________
- 77 -
Advertisement
Table of Contents
