Power-Off The Lemx Recorder - Santec SanStore-4LEMX User Manual

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
Connections:
1. 4, 8 or 16 camera inputs: BNC connectors
2. Video output: Composite video out (BNC)
3. Spot monitor (BNC)
4. Audio input / speaker output: RCA
5. VGA connector
6. HDMI connector
7. LAN (RJ-45 Ethernet port): To connect the recorder with the network
8. Mouse connector: To connect a PS2 USB
9. 4, 8 or 16 alarm inputs
10. Alarm output replay
11. RS-422/485: To connect a PTZ camera.
12. RS-232C: Only for development purposes.
13. 12 V DC power jack

2.1.3 Power-off the LEMX recorder

If you power-off the recorder by using the button on the recorder's front panel or by using
the remote control, the following message appears:
This means that you need to disconnect the power cord (i.e. disconnect the recorder
from power) to definitely switch off the recorder. It is recommended to follow this
procedure if the recorder is not used for a longer period of time or if the recorder is
defective.
_____________________________________________________________________________
- 15 -