Santec SanStore-4LEMX User Manual page 43

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
Depending on your "category" selection, either "grid" or "tune" (only for LEMX series) is
displayed with the following setting options:
Grid:
Sensitivity:
The camera sensitivity can be adjusted using either the [ + - ] buttons or the
mouse. Default value is 10.
Motion grid:
Privacy mask:
o To be in line with privacy regulations, you may cover (mask) certain areas by a
rectangle in the picture (live picture, recording and playback).
o Default setting is OFF.
o Press the down button on the recorder front panel or on the remote control to
call up the "privacy mask" function. The grid is displayed.
o Right-click on the
To define the motion grid or the privacy mask cell-by-cell, do the following:
On the front panel or remote control, press any of direction buttons to highlight a cell in
the motion detection area, and then press [ +] . This area is selected and the cells are
highlighted in red.
Clear all. Press [ENTER] or [ + - ] or the mouse to select.
Select specific. Press [ENTER] or [ + - ] or the mouse to select.
_____________________________________________________________________________
Select all. Press [ENTER] or [ + - ] or the mouse to select.
Clear all. Press [ENTER] or [ + - ] or the mouse to select.
Select specific. Press [ENTER] or [ + - ] or the mouse
to select.
icon.
- 43 -