Spot Monitor - Santec SanStore-4EM User Manual

5.5. Spot monitor

In addition to the main monitor, attaching a spot monitor enables the user to monitor specific
channels independently from the main monitor.
Procedure:
Press the [SPOT] button on the remote control and then the numeric button of the
camera you wish to see in full screen.
Press the [SPOT] button twice to toggle between cameras. The interval between
camers is described in chapter 6.2.2,
If an alarm is triggered, the respective channel is displayed in full screen.
_________________________________________________________________________________
User manual SanStore-4EM / SanStore-8EM
- 22 -