Table of Contents
Advertisement
7.6.2 General
LEMX series:
Access port:
Select a value from 0001 to 9999.
Enter the port number that the client will use to communicate with the DVR over the
Internet. The default port is 7000. It is recommended to use a port >1,000.
Bandwidth:
Select the network bandwidth to limit the amount of network resources allocated to client
connection.The default is unlimited: 4 KBPS - 8 MBPS
Block:
Ping:
No response for ping. Default is OFF.
Scan:
No response for auto scan. Default is OFF.
Stream mode:
For stream mode, choose between "dual" and "optimized".
Dual:
Video/audio streaming with a defined quality. It is independent from the recorder
configurations.
Optimized:
Video/audio streaming with maximum data throughput. It depends on the
recorder configurations. It is recommended to use the manufacturer's method to
achieve a better network/streaming rate.
Stream property:
It is activated if you have selected "dual streaming".
Access host (only available for LMX series):
Options are "Off", "Deny" and "Allowed". If "Deny" or "Allow" has been selected, the tab
menu "host" becomes active (also see chapter 7.6.6).
_____________________________________________________________________________
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
LMX series:
- 62 -
User manual
Advertisement
Table of Contents
