Device; General - Santec SanStore-4LEMX User Manual

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX

7.7 Device

7.7.1 General

This DVR support 4, 8 or 16 channels (depeding on the model) for audio, alarm inputs
and
4 relay outputs. A HDMI output is supported, too.
The menus are displayed with options on the left-hand column and settings in the right
hand column. A cursor (highlighted menu) can be moved using the direction buttons [
] .
1) Display:
Please define the output resolution.
The DVR automatically detects and set correct video resolution.
800 x 600  1024 x 768  1280 x 720  1280 x 1024  1600 x 1200 
1680 x 1050  1920 x 1080I  1920 x 1080P
HDMI Auto:
If the "HDMI Auto" function is activated, the HDMI resolution on the monitor is
automatically recognised and adjusted. If a VGA monitor is used, it may happen
that it doesn't support a high-resolution and thus the notification "Not supported
format" is displayed.
Note:
This video resolution will apply to both HDMI and VGA outputs. If the VGA
monitor is not able to support high resolution, it might happen that no video
is displayed.
In case of displaying video on HDMI and VGA output simultaneously,
please set the lowest resolution.
If both HDMi as well as VGA are to be used, please make sure not to
exceed the maximum VGA resolution of 1280x1024 (4:3) or 1280x720
(16:9). Moreover, the box "HDMI Auto" must be unchecked.
_____________________________________________________________________________
- 71 -