Remote Control - Santec SanStore-4LEMX User Manual

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX

2.3 Remote control

Note: DVR ID button:
Set the proper DVR system ID through which to operate. Press the ID button, and then
press the number button within two seconds to select the system ID of the DVR. If you
set the system ID to zero, you can control multiple DVRs at the same time.
_____________________________________________________________________________
- 21 -