Camera Connection; Audio Connection; Monitor Connection - Santec SanStore-4LEMX User Manual

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX

3.2 Camera connection

4 / 8 / 16 cameras can be connected tot he video inputs (BNC) on the recorder's rear
panel. To connect a PTZ camera, please connect the control line of the PTZ camera to
the RS-422 TX+, RS-422 TX- terminal and connect the video output on the recorder's
rear panel.

3.3 Audio connection

The recorder has an audio output and an audio input. If you want to record and playback
audio signals, please connect the respective audio device (microphone) to the audio
input
(1 Vpp, 600 Ohm) and connect the speaker to the audio output (see below).

3.4 Monitor connection

The recorder has 3 video outputs (2x BNC, 1x VGA), located on the rear panel. Here
you can plug-in monitors.
1x BNC for main composite video output
1x BNC for spot composite video output
1x VGA output
1x HDMI connection
_____________________________________________________________________________
- 25 -