Pan/Tilt Zoom (Ptz) Control; Ptz Menu - Santec SanStore-4LEMX User Manual

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX

8. PAN/TILT ZOOM (PTZ) CONTROL

PTZ control is available to support dome cameras. The PTZ option must be configured
for each camera channel.
The layout of the PTZ interface is identical to the layout of the front of the DVR or the
remote control. The menu button is the guide anchor position for all other buttons. When
in PTZ interface mode, all buttons are used for PTZ related operation.

8.1 PTZ menu

To activate the pan/tilt control, select the full screen display of the camera you wish to
control.
Then press the [ ] button. The following window pops up:
PTZ
INDICATOR
[ENTER]
[CANCEL]
[MENU]
Directions
decrease/increase
_____________________________________________________________________________
Press this button to display the "HELP" menu. Press the [ENTER] button
again or the [CANCEL] button to cancel the "Help" menu.
Press this button to cancel the "PAN/TITL" operation.
Press the [Menu] button to control
all functions via the PTZ interface.
Press this button again to access
the short-cut menu.
To tilt up/down.
To pan right/left.
To zoom in/out.
- 81 -
ACTIONS