Ptz Event - Santec SanStore-4LEMX User Manual

User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX

7.7.3 PTZ event

If an event is triggered by an alarm, motion or video loss, this DVR sends a preset
command to the PTZ camera. PTZ option must be enabled and a protocol must be
assigned to the camera channel.
Channel:
Select the desired PTZ camera.
Active:
Configure the PTZ action: none  go to  tour
Inactive:
Configure the command once an event has ended: none  go to  tour
Event edit:
Press [ENTER] to edit multiple events. The menus are displayed with options on the left-
hand column and settings in the right hand column. A cursor (highlighted menu) can be
moved using the direction buttons [
Note:
Do not set up motion detection on the PTZ camera for a PTZ event. The signal will
be
looping. Use the [ - + ] buttons to change the values.
To save changes and exit the menu, press the [MENU] button or click "SAVE".
To exit the menu without making changes, press the [CANCEL] button. Alternatively,
close the window by clicking the cross.
_____________________________________________________________________________
] on the remote control or the front panel.
- 75 -