Switch Setup (Monitor Configuration) - Santec SanStore-4LEMX User Manual

7.1.2 Switch setup (monitor configuration)

1. The menus are displayed with options on the left-hand column and settings in the
right hand column. A cursor (highlighted menu) can be moved using the direction
buttons [ ] .
2. Settings
Device:
Each monitor may be configured in a different way.
Main monitor, spot 1.
Dwell time:
Select the interval that each camera or multi-screen mode is alternatingly
displayed. Use the [-, +] button to make your adjustment: 1-30 seconds.
Split mode:
Select the appropriate monitor display you wish to make any adjustments to.
These adjustments will be activated while it's in switch mode.
_____________________________________________________________________________
Sequence: Automatic sequence.
Shift: Selected camera will be displayed according to dwell time.
Event:
A particulat camera is displayed in full screen or in multi-mode
once an event is triggered.
- 40 -
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
User manual