Santec SanStore-4LEMX User Manual page 12

3. Menu/ESC-button
Menu:
ESC :
4. Enter/10+ button
Enter :
10. Example: Press this button and then „6" to see channel „16".
5. Quad/Plus button
Press this button to display the cameras in multi-screen mode.
This button is also used to switch channels or to increase values in the setup
menu.
6. Channel/numeric buttons:
Press these buttons to enter data and to make selections, e.g. enter the numeric
code when prompted for a password, channel selection or date selection in
schedule option mode.
Use the minus button [-] and the plus button [+] to decrease or increase the
settings or channels.
7. Remote control signal receiver:
Do not block the receiver port on the recorder. Doing so may cause the remote
control to function improperly.
8. Power button
Press this button to turn on the recorder (the LED lights up). Press it again to turn
off the recorder (the LED goes off).
9. USB port
This USB port allows you to connect memory sticks to backup video data.
_____________________________________________________________________________
:
Press this button to display the main menu screen.
Press this button to exit the menu without saving.
:
Press this button to save menu settings or to select channels over
:
:
:
- 12 -
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
User manual