Yealink SIP-T2xP Auto Provisioning Manual page 97
Hide thumbs
Also See for SIP-T2xP:
- Administrator's manual (589 pages) ,
- Provisioning manual (294 pages) ,
- Administration manual (247 pages)
Table of Contents
Advertisement
Parameter
wui.http_enable =
Permitted Values
For SIP-T19P IP phones:
The default value is SIP-T19P .
For SIP-T48G IP phones:
The default value is SIP-T48G.
For SIP-T46G IP phones:
The default value is SIP-T46G.
For SIP-T42G IP phones:
The default value is SIP-T42G.
For SIP-T41P IP phones:
The default value is SIP-T41P .
For CP860 IP phones:
The default value is CP860.
It takes effect after a reboot.
It enables or disables the HTTP protocol for
web server access.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It takes effect after a reboot.
Descriptions
Network-> Advanced->Web
Server->HTTP
Appendix
Web Setting Path
87
Advertisement
Table of Contents
