Yealink SIP-T2xP Auto Provisioning Manual page 180

Yealink IP Phones Auto provisioning Guide
Parameter
zero_touch.enable =
zero_touch.wait_time =
push_xml.server =
(not applicable to CP860 IP phones)
push_xml.block_in_calling =
(not applicable to CP860 IP phones)
170
Permitted Values
The default value is 10.
It enables or disables zero touch for the
phone to perform provisioning during
startup.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It configures the duration time (in seconds)
of the phone displaying the zero-sp-touch
Integer from 1 to
configuration screen when powered on.
100
The default value is 5.
It configures the IP address of the push XML
server.
IP address
The default value is blank.
It enables or disables the phone to block
displaying the push XML screen when in
calling status.
0 or 1
0-Disabled
1-Enabled
Descriptions
Settings->Auto Provision->Zero Active
Settings->Auto Provision->Wait Time
(1~100s)
Features->Remote Control->Push XML
Server IP Address
Features->Remote Control->Block
XML In Calling
Web Setting Path