Yealink IP Phones Auto provisioning Guide
Parameter
auto_provision.power_on =
auto_provision.pnp_enable =
auto_provision.weekly.enable =
94
Permitted Values
The default value is 3.
It takes effect after a reboot.
It enables or disables the phone to perform
an auto provisioning process when
powered on.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
Note: The old parameter
"auto_provision.mode" is also applicable to
IP phones.
It enables or disables Plug and Play feature.
If it is enabled, the phone will broadcast PnP
SUBSCRIBE messages to obtain a
provisioning server address after startup.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
It enables or disables the phone to check
new configuration weekly.
0 or 1
0-Disabled
Descriptions
Settings->Auto Provision->Power On
Settings->Auto Provision->PNP Active
Settings->Auto provision->Weekly
Web Setting Path