Yealink SIP-T2xP Auto Provisioning Manual page 123
Hide thumbs
Also See for SIP-T2xP:
- Administrator's manual (589 pages) ,
- Provisioning manual (294 pages) ,
- Administration manual (247 pages)
Table of Contents
Advertisement
Parameter
voice.handfree.tone_vol =
voice.handset.tone_vol =
(not applicable to CP860 IP phones)
voice.headset.tone_vol =
(not applicable to CP860 IP phones)
voice.handfree_send =
(only applicable to SIP-T28P , SIP-T26P , SIP-T22P and
SIP-T20P IP phones)
voice.handset_send =
(only applicable to SIP-T28P , SIP-T26P , SIP-T22P and
Permitted Values
It configures the dial tone volume of
speaker.
Integer from 1 to 15
The default value is 8.
It takes effect after a reboot (only for
SIP-T28P/T26P/T22P/T20P IP phones).
It configures the dial tone volume of
handset.
Integer from 1 to 15
The default value is 8.
It takes effect after a reboot (only for
SIP-T28P/T26P/T22P/T20P IP phones).
It configures the dial tone volume of
headset.
Integer from 1 to 15
The default value is 8.
It takes effect after a reboot (only for
SIP-T28P/T26P/T22P/T20P IP phones).
It configures the sending volume of speaker.
Integer from 1 to 53
The default value is 35.
It takes effect after a reboot.
It configures the sending volume of handset.
Integer from 1 to 53
The default value is 25.
Descriptions
Features-> Audio->Handfree Send
Volume (1~53)
Features-> Audio->Handset Send
Volume (1~53)
Appendix
Web Setting Path
113
Advertisement
Table of Contents
