Yealink SIP-T2xP Auto Provisioning Manual page 41
Hide thumbs
Also See for SIP-T2xP:
- Administrator's manual (589 pages) ,
- Provisioning manual (294 pages) ,
- Administration manual (247 pages)
Table of Contents
Advertisement
password (optional) in the Auto Provision screen.
An example of screenshot is shown as below:
Yealink IP phones support obtaining the provisioning server address from the PnP server.
The phone broadcasts the PnP SUBSCRIBE message to obtain the provisioning server
address during startup. To use Plug and Play, make sure this feature is enabled.
To configure PnP via web user interface:
1.
Click on Settings->Auto Provision.
2.
Mark the On radio box in the PNP Active field.
3.
Click Confirm to accept the change.
Obtaining the Address of Provisioning Server
31
Advertisement
Table of Contents
