Yealink SIP-T2xP Auto Provisioning Manual page 282

Yealink IP Phones Auto provisioning Guide
Parameter
SIP-T21P/T20P: X ranges from 1 to 2.
SIP-T19P: X=1.
Not applicable to CP860 IP phones.)
account.X.call_center.queue_status_light_enable =
(SIP-T28P/T48G/T46G: X ranges from 1 to 6.
SIP-T26P/T22P/ T42G/T41P: X ranges from 1 to 3.
SIP-T21P/T20P: X ranges from 1 to 2.
SIP-T19P: X=1.
Not applicable to CP860 IP phones.)
account.X.hoteling.enable =
(SIP-T28P/T48G/T46G: X ranges from 1 to 6.
SIP-T26P/T22P/ T42G/T41P: X ranges from 1 to 3.
SIP-T21P/T20P: X ranges from 1 to 2.
272
Permitted Values
1-Enabled
The default value is 0.
It enables or disables the power indicator
LED to flash when the ACD call queue has
reached the maximum number of calls for
account X.
0-Disabled (power indicator LED does not
flash)
1-Enabled (power indicator LED fast flashes
0 or 1
(300ms) green)
If it is set to 0, the status of the power
indicator LED is determined by the value of
the parameter
"phone_setting.common_power_led_enabl
e".
The default value is 0.
It enables or disables hoteling feature for
account X.
0 or 1
0-Disabled
1-Enabled
Descriptions Web Setting Path