Yealink SIP-T2xP Auto Provisioning Manual page 206

Yealink IP Phones Auto provisioning Guide
Parameter
features.relog_offtime =
features.direct_ip_call_enable =
features.allow_mute =
features.group_listen_in_talking_enable =
(not applicable to CP860 IP phones)
196
Permitted Values
indicator LED is determined by the value of
the parameter
"phone_setting.common_power_led_enabl
e".
It configures the web access timeout (in
minutes).
Integer from 1 to
1000 The default value is 5.
It takes effect after a reboot.
It enables or disables the phone to make an
IP call directly.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It enables or disables the phone to mute an
active call.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It enables or disables the phone to enter
0 or 1
into the group listening mode by pressing
the speakerphone key when it is in talking
Descriptions
Features->General
Information->Auto-Logout Time
(1~1000min)
Features->General Information->
Allow IP Call
Features->General
Information->Allow Mute
Web Setting Path