Yealink SIP-T2xP Auto Provisioning Manual page 181

Parameter
push_xml.sip_notify =
features.action_uri_limit_ip =
dialplan.area_code.code =
dialplan.area_code.min_len =
Permitted Values
The default value is 0.
It enables or disables the phone to use the
push XML via SIP NOTIFY message.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It configures the IP address of server from
which the phone receives the action URI
requests.
Multiple IP addresses are separated by
commas.
IP address or any
If it is set to any, the phone will receive
action URI requests from any server.
If it is left blank, the phone will not receive
action URI requests.
The default value is blank.
It configures the area code.
String within 16
characters
The default value is blank.
Integer from 1 to 15
It configures the minimum length of the
Descriptions
Features->Remote Control->SIP Notify
Features->Remote Control->Action
URI allow IP List
Settings->Dial Plan->Area
Code->Code
Settings->Dial Plan->Area Code->Min
Appendix
Web Setting Path
171