Yealink SIP-T2xP Auto Provisioning Manual page 90
Hide thumbs
Also See for SIP-T2xP:
- Administrator's manual (589 pages) ,
- Provisioning manual (294 pages) ,
- Administration manual (247 pages)
Table of Contents
Advertisement
Yealink IP Phones Auto provisioning Guide
Parameter
network.ipv6_primary_dns =
network.ipv6_secondary_dns =
network.ipv6_icmp_v6.enable =
(only applicable to SIP-T48G/T46G IP phones)
80
Permitted Values
It takes effect after a reboot.
It configures the primary IPv6 DNS server
when the IP address mode is configured as
IPv6 or IPv4&IPv6, and the Internet (WAN)
port type for IPv6 is configured as Static IP
IPv6 address
Address.
The default value is blank.
It takes effect after a reboot.
It configures the secondary IPv6 DNS server
when the IP address mode is configured as
IPv6 or IPv4&IPv6, and the Internet (WAN)
port type for IPv6 is configured as Static IP
IPv6 address
Address.
The default value is blank.
It takes effect after a reboot.
It enables or disables the phone to obtain
IPv6 network settings by ICMPv6.
0-Disabled
0 or 1
1-Enabled
The default value is 1.
It takes effect after a reboot.
Descriptions
Network->Basic-> IPv6 Config->Static
IP Address-> Primary DNS
Network-> Basic-> IPv6 Config->Static
IP Address-> Secondary DNS
Network->Advanced->ICMPv6
Status->Active
Web Setting Path
Advertisement
Table of Contents
