Yealink SIP-T2xP Auto Provisioning Manual page 35

indicates the end of a template.
The default display names of directory lists are Local Directory, History, Remote

Phone Book and LDAP .
When specifying the priority of search results, the valid values are 1, 2, 3 and 4. 1 is

the highest priority, 4 is the lowest.
When enabling or disabling the phone to search the desired directory list, the valid

values are 0 and 1. 0 stands for Disabled, 1 stands for Enabled.
To customize a super search template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, edit the corresponding string in
the file. For example, you want to configure the local directory list, edit the
following strings:
<item id_name="local_directory_search" display_name="Local Directory"
priority="1" enable="1" />
Where:
id_name="" specifies the directory list (id_name = "local_directory_search"
specifies the local directory list). Do not edit this field.
display_name="" specifies the display name of the directory list. We recommend
you do not edit this field.
priority="" specifies the priority of search results.
enable="" enables or disables the phone to search the directory list.
3. Edit the values within double quotes.
4. Place this file to the provisioning server.
The following is an example of a super search template:
<root_super_search>
<item id_name="local_directory_search" display_name="Local Directory"
priority="1" enable="1" />
<item id_name="calllog_search" display_name="History" priority="2"
enable="1" />
<item id_name="remote_directory_search" display_name="Remote Phone
Book" priority="3" enable="0" />
<item id_name="ldap_search" display_name="LDAP" priority="4" enable="0" />
</root_super_search>
Yealink IP phones allow you to upgrade firmware manually via web user interface, or
upgrade firmware in batch via auto provisioning.
Getting Started
25