Yealink SIP-T2xP Auto Provisioning Manual page 194

Yealink IP Phones Auto provisioning Guide
Parameter
features.intercom.barge =
features.remote_phonebook.enable =
(not applicable to SIP-T20P IP phones)
features.remote_phonebook.flash_time =
(not applicable to SIP-T20P IP phones)
features.hotline_number =
features.hotline_delay =
184
Permitted Values
It enables or disables the phone to barge in
an intercom call.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It enables or disables the phone to perform
a remote phone book search when
receiving an incoming call.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
Integer from 120 to It configures the interval (in seconds) for the
2592000 phone to update the data of the remote
phone book from the remote phone book
(Integer from 3600
server.
to 2592000 for
CP860) The default value is 21600.
It configures the hotline number.
String within 32
characters
The default value is blank.
It configures the delay time (in seconds) for
Integer from 0 to 10
the phone to dial out the hotline number
Descriptions
Features->Intercom ->Intercom Barge
Directory->Remote Phone Book->
Search Remote Phonebook Name
Directory->Remote Phone Book->
Search Flash Time (Seconds)
Features->General Information->
Hotline Number
Features->General Information->
Hotline Delay (0~10s)
Web Setting Path