Yealink SIP-T2xP Auto Provisioning Manual page 33

blank or enter 0, this dial-now rule will apply to all lines.
3. Specify the values within double quotes.
4. Save the change.
The following shows an example of a dial-now file:
<DialNow>
<Data DialNowRule="1234" LineID="1"/>
<Data DialNowRule="52[0-6]" LineID="1"/>
<Data DialNowRule="xxxxxx" LineID=""/>
</DialNow>
####################################################
##
####################################################
dialplan_dialnow.url =
For example, enter "tftp://192.168.1.100/DialNow.xml" in the "dialplan_dialnow.url ="
field. During the auto provisioning process, the phone connects to the provisioning
server "192.168.1.100", and downloads the dial-now file "DialNow.xml".
Directory provides easy access to frequently used lists. You can access lists by pressing
the Directory soft key when the IP phone is idle. The lists may contain Local Directory,
History, Remote Phone Book and LDAP (LDAP list is not applicable to SIP-T19P IP phones).
You can add the desired list(s) to Directory using the supplied directory template
(favorite_setting.xml). After setup, place the directory template to the provisioning
server and specify the access URL in the configuration files. Directory is not applicable
to SIP-T20P IP phones.
When editing a directory template, learn the following:
Do not rename the directory template.

<root_favorite_set> indicates the start of a template and </root_favorite_set>

indicates the end of a template.
The default display names of directory lists are Local Directory, History, Remote

Phone Book and LDAP .
When specifying the display priority of the directory list, the valid values are 1, 2, 3

and 4. 1 is the highest priority, 4 is the lowest.
When enabling or disabling the desired directory list for Directory, the valid values

are 0 and 1. 0 stands for Disabled, 1 stands for Enabled.
Upload dial-now file
Getting Started
##
23