Yealink SIP-T2xP Auto Provisioning Manual page 88

Yealink IP Phones Auto provisioning Guide
Parameter
network.pppoe.user =
(not applicable to SIP-T42G, SIP-T41P and CP860 IP
phones)
network.pppoe.password =
(not applicable to SIP-T42G, SIP-T41P and CP860 IP
phones)
network.ipv6_internet_port.type =
network.ipv6_static_dns_enable =
78
Permitted Values
It configures the user name for PPPoE
connection.
String within 32
characters The default value is blank.
It takes effect after a reboot.
It configures the password for PPPoE
connection.
String within 99
characters The default value is blank.
It takes effect after a reboot.
It configures the Internet (WAN) port type for
IPv6 when the IP address mode is
configured as IPv6 or IPv4&IPv6.
0-DHCP
0 or 1
1-Static IP Address
The default value is 0.
It takes effect after a reboot.
It enables or disables the phone to use
manually configured static IPv6 DNS when
0 or 1 Internet (WAN) port type for IPv6 is
configured as DHCP .
0-Disabled (use the IPv6 DNS obtained by
Descriptions
Network->Basic-> IPv4 Config->
PPPoE->User Name
Network->Basic-> IPv4 Config->
PPPoE->Password
Network->Basic-> IPv6 Config
Network->Basic-> IPv6 Config->IPv6
Static DNS
Web Setting Path