Yealink SIP-T2xP Auto Provisioning Manual page 91

Parameter
network.bridge_mode =
(only applicable to SIP-T28P , SIP-T26P , SIP-T22P and
SIP-T20P IP phones)
network.pc_port.enable =
(not applicable to CP860 IP phones)
network.pc_port.ip =
(only applicable to SIP-T28P , SIP-T26P , SIP-T22P and
SIP-T20P IP phones)
network.pc_port.mask =
(only applicable to SIP-T28P , SIP-T26P , SIP-T22P and
Permitted Values
It configures the PC (LAN) port type.
0-Router
1-Bridge
The default value is 1.
0 or 1
It takes effect after a reboot.
Note: SIP-T19P/T21P/T48G/T46G/ T42G/T41P/
IP phones only support bridge mode for PC
connection.
It enables or disables the PC port.
0-Disabled
1-Auto Negotiation
0 or 1
The default value is 1.
It takes effect after a reboot.
It configures the IP address of the PC (LAN)
port when the PC (LAN) port is configured as
Router.
IP address
The default value is 10.0.0.1.
It takes effect after a reboot.
It configures the mask of the PC (LAN) port
IP address
when the PC (LAN) port is configured as
Descriptions
Network->PC Port ->PC Port Config
Network->PC Port ->PC Port Active
Network->PC Port ->PC Port Config
->As Router->IP Address
Network->PC Port ->PC Port Config
->As Router ->Subnet Mask
Appendix
Web Setting Path
81