Yealink SIP-T2xP Auto Provisioning Manual page 114

Yealink IP Phones Auto provisioning Guide
Parameter
transfer.blind_tran_on_hook_enable =
transfer.on_hook_trans_enable =
transfer.dsskey_deal_type =
(not applicable to CP860 IP phones)
104
Permitted Values
screen before displaying the caller ID when
performing a semi-attended transfer.
0-Enabled
1-Disabled
The default value is 1.
It enables or disables the phone to
complete the blind transfer through
on-hook.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
It enables or disables the phone to
complete the attended transfer through
on-hook.
0 or 1
0-Disabled
1-Enabled
The default value is 1.
It configures the DSS key behavior during an
active call when user presses the DSS key
0, 1 or 2
and the DSS key is configured as a speed
dial, transfer or BLF/BLF list key.
Descriptions
Transfer
Features->Transfer ->Blind Transfer On
Hook
Features->Transfer ->Semi Attend
Transfer On Hook
Features->Transfer ->Transfer Mode
Via Dsskey
Web Setting Path