Yealink SIP-T2xP Auto Provisioning Manual page 182

Yealink IP Phones Auto provisioning Guide
Parameter
dialplan.area_code.max_len =
dialplan.area_code.line_id =
(not applicable to SIP-T19P and CP860 IP phones)
dialplan.block_out.number.X =
(X ranges from 1 to 10)
dialplan.block_out.line_id.X =
(X ranges from 1 to 10)
172
Permitted Values
number prefixed with the area code.
The default value is 1.
It configures the maximum length of the
number prefixed with the area code.
Integer from 1 to 15 The value must be larger than the minimum
length.
The default value is 15.
It configures lines applying the area code.
0 to 6 (for SIP-T28P/T48G/T46G)
0 to 3 (for SIP-T26P/T22P/T42G/T41P)
0 to 2 (for SIP-T21P/T20P)
Integer
Multiple line IDs are separated by commas.
0 stands for all lines.
If it is left blank, the area code rule will
apply to all accounts on the phone.
The default value is blank.
It configures the block out string.
String within 32
characters
The default value is blank.
It configures lines applying the block out
Integer
rule.
Descriptions
Length (1-15)
Settings->Dial Plan->Area
Code->Max Length (1-15)
Settings->Dial Plan->Area
Code->Account
Settings->Dial Plan->Block
Out->BlockOut NumberX
Settings->Dial Plan->Block
Out->Account
Web Setting Path