Yealink SIP-T2xP Auto Provisioning Manual page 101

Parameter
openvpn.url =
(not applicable to SIP-T19P IP phones)
network.lldp.enable =
network.lldp.packet_interval =
network.span_to_pc_port =
(not applicable to CP860 IP phones)
Permitted Values
The default value is 0.
It takes effect after a reboot.
It configures the access URL of the *.tar file
URL within 511
for OpenVPN.
characters
The default value is blank.
It enables or disables LLDP feature.
0-Disabled
0 or 1 1-Enabled
The default value is 1.
It takes effect after a reboot.
It configures the interval (in seconds) for the
phone to broadcast the LLDP request.
Integer from 1 to
3600 The default value is 60.
It takes effect after a reboot.
It enables or disables the phone to span
data packets received in the WAN port to
the PC port. If it is enabled, all packets from
0 or 1
WAN port can be received by PC port.
0-Disabled
1-Enabled
Descriptions
Network-> Advanced->VPN->Upload
VPN Config
Network-> Advanced->LLDP->Active
Network-> Advanced->LLDP->Packet
Interval (1~3600s)
Network-> Advanced->Span to
PC->Span to PC Port
Appendix
Web Setting Path
91