Yealink SIP-T2xP Auto Provisioning Manual page 95

Parameter
network.vlan.pc_port_vid =
(not applicable to CP860 IP phones)
network.vlan.pc_port_priority =
(not applicable to CP860 IP phones)
network.vlan.pc_port_mode =
(only applicable to SIP-T4X IP phones)
network.vlan.dhcp_enable =
Permitted Values
It configures VLAN ID of the PC (LAN) port.
Integer from 1 to
The default value is 1.
4094
It takes effect after a reboot.
It configures VLAN priority of the PC (LAN)
port.
Integer from 0 to 7
The default value is 0.
It takes effect after a reboot.
It configures the way the phone processes
packets sent from the PC port when VLAN is
enabled on the PC port.
0-Forward the packets directly
1-Tag and then forward the packets if there
0 or 1
is no VLAN tag on the packets, otherwise,
forward the packets directly.
The default value is 0.
It takes effect after a reboot.
It enables or disables the phone to obtain
VLAN by DHCP .
0 or 1
0-Disabled
1-Enabled
Descriptions
Network-> Advanced->VLAN >PC
Port->VID (1-4094)
Network-> Advanced->VLAN >PC
Port->Priority
Network-> Advanced->VLAN >DHCP
VLAN-> Active
Appendix
Web Setting Path
85