Communicating With Pc Applications Over A Csta Interface - Siemens HiPath 500 User Manual

Step by Step
*494
+ - 0
Communicating with PC applications
over a CSTA interface
If configured (contact your service personnel), you can
use your phone to communicate with PC applications
(CSTA = Computer Supported Telecommunications
Applications). Information is sent to the application and
received from the application via acoustic signaling.
if available:
S
Press the "Data I/O" key.
or
Enter the code.
j
Enter the three-digit ID for the application you wish to
control.
9
...
Use the relevant keys to communicate with the applica-
tion.
Temporarily interrupting communication with the
application
^
The phone is ringing. You answer the call.
T
The "Data I/O" key flashes: Communication to the appli-
cation is automatically interrupted.
Resuming communication with the application
T
Press the flashing "Data I/O" key. The LED lights up.
Ending communication with the application
^ \
Lift the handset and replace it again.
More functions/services
59