Communicating With Pc Applications Over A Csta Interface; Controlling Relays (Only For Hipath 3000) - Siemens HiPath 2000 Operating Instructions Manual

More functions/services
Step by Step
)494
+- 0
*90=Control Relay On?
#90=Control Relay Off?
1
76
Communicating with PC applications
over a CSTA interface
If configured (contact your service personnel), you can
use your phone to communicate with PC applications
(CSTA = Computer Supported Telecommunications Ap-
plications). You send information to the application and
receive information from the application, for example,
via your phone display.
Enter the code.
j
Enter the three-digit ID for the application you wish to
control.
9 e
... Use the relevant keys to communicate with the applica-
tion.
Ending communication with the application
Select and confirm the relevant CSTA message.
or
^ \
Lift the handset and replace it again.
Controlling relays
(only for HiPath 3000)
If this function has been configured (contact your ser-
vice personnel), you can use up to four relays to enable/
disable different devices (such as a door opener).
Depending on how you program the relays, you can ac-
tivate and deactivate them manually them or configure
them to activate and deactivate automatically (after tim-
eout).
Select and confirm the option shown,
or
select and confirm the option shown.
4
... Enter the relay.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) page 87!