Output Method Dialog Box - Canon iPF755 User Manual

Hide thumbs Also See for iPF755:

Table of Contents

Windows Software

Roll Paper Margin for Safety

Near End Margin

This sets the length of the near end margin of the roll paper.

Printer Default

• If you make the margin (white space) too small, this could disturb the print image or cause the printhead

to scour the surface of some types of media. If the printhead scours the surface of the media, adjust the

height of the printhead.

This selects the auto cut speed.

Printer Default

Output Method Dialog Box

Output Method dialog box appears when you click Output Method button on the Main sheet in the Custom Proper-

ties dialog box. You can specify the output method for HDI Driver.

Save in mail box

Output Method Dialog Box

The settings of the printer operating panel are applied.

Print at a standard size.

*Select for Media Type that has no problem when printing with a standard size

This setting sets the margin about 17 mm (in the feed direction) longer than the

standard margin for the media size.

*This is for Media Type that has a strong tendency to curl, causing the printhead

to scratch the surface.

The settings of the printer operating panel are applied.

Select this setting if cutting with the Standard setting is not clean.

Select this setting when you are not experiencing problems.

Select this setting if cutting with the Standard setting is not clean.

Normal printing. The print job data is stored temporarily in the box as the job

The print data is saved in the mail box on the HDD without printing.

Table of Contents