Canon iPF755 User Manual page 725

Item
Use Zeroconf Func-
tion
IP Address
Subnet Mask
Gateway Address
LPD Printing
IPP Printing
IPP Printer URI
RAW Printing
RAW Mode Bi-di-
rection
FTP Printing
Use Discovery
Scope
SMTP Server Ad-
dress
Primary DNS Serv-
er Address
Secondary DNS
Server Address
DNS Host Name
DNS Domain Name
Multicast DNS
Service Name
7.
Click OK to display the Network page.
Note
• If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that
supports such protocol running in the network.
• If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by
this method is used first. If you cannot obtain the IP address, the address specified in IP Address is used.
• It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend
clearing check boxes of options you will not use.
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS
servers and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and
DNS Domain Name, respectively.
iPF755
Details
Activate this setting to use Bonjour.
Specify the printer's IP address.
Specify the printer's subnet mask.
Specify the printer's default gateway.
Activate this setting to use LDP Printing.
Activate this setting to use IPP Printing.
Specify the URI of the printer used for IPP printing using up to
252 characters.
Activate this setting to use Raw Printing.
Activate this setting to use Raw mode bidirectional communica-
tion.
Activate this setting to use FTP Printing.
Activate this setting to use SLP Discovery function.
Enter the SLP search range.
Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Specify the printer host name, up to 63 characters (1–63 charac-
ters). Use single-byte letters, numbers, and - (hyphens). Do not
use numbers or - for the first character or - for the last character.
Specify the printer domain name, up to 63 characters. Use sin-
gle-byte letters, numbers, - (hyphens), and . (periods). Do not
use numbers, -, or . for the first character, or - or . for the last
character.
Specify the printer's Multicast DNS service name. (1–63 charac-
ters)
This name will be displayed when Bonjour functions are used.
Network Setting
On
0.0.0.0
0.0.0.0
0.0.0.0
On
On
printer
On
Off
On
On
default
0.0.0.0
0.0.0.0
0.0.0.0
NB-18GBipxxxxxx
blank
Canon iPFxxxx
(xxxxxx)
Configuring the Printer's TCP/IP Network Settings
> Network Setting >
Default Setting
10
709