Paper Jam; Paper Is Crooked; Push The Release Lever Back - Canon iPF755 User Manual

Hide thumbs Also See for iPF755:
Table of Contents

Advertisement

Error Message
>

Paper jam

"Push the release lever back."

Cause
A paper jam oc-
curred in the
printer during
printing.
"Manually rewind the roll all the way and press OK."
Cause
A paper jam occur-
red when advancing
the paper.

Paper is crooked.

13
Paper loaded crooked was detected when the paper was advanced.
810
Paper jam
Messages regarding paper
>
1.
Push the Release Lever back and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
2.
Load the paper.
3.
Pull the Release Lever forward.
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
1.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2.
Load the paper.
3.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
Cause
Corrective Action
→P.770
→P.773
→P.588
→P.609
Corrective Action
→P.588
Corrective Action
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it
parallel to the orange Paper Alignment
Line.
3.
Pull the Release Lever forward.
(See "Loading Rolls in the Printer.")
→P.588
If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push
the roll firmly in until it touches the Roll Hold-
er flange, and reload the Roll Holder in the
printer.
(See "Attaching the Roll Holder to Rolls.")
→P.585
Follow these step to reload a sheet.
1.
Push the Release Lever back.
2.
Pull out the sheet.
iPF755

Advertisement

Table of Contents
loading

Table of Contents