Canon iPF755 User Manual page 376

Windows Software
4.
The Plot dialog box opens.
Perform the settings that you need on the Plot dialog box, then click the OK button.
4
5.
The print job begins.
360
Printing
> HDI Driver >
Note
• The content of the settings done in the Plotter Configuration Editor dialog box are reflected in
the Paper size settings on the Plot dialog box.
• For more details about the Plot dialog box, please refer to the AutoCAD manual.
Note
• If the output exceeds the number of pixels prescribed for the media, in order to prevent AutoCAD
from hanging up during the print job a warning dialog box opens and asks if you want to lower
the resolution or reduce the number of colors. If this occurs, click the OK button to cancel the
print job and then lower the resolution or reduce the number of colors.
• Some media may not allow printing with certain resolution settings. If you have selected a resolu-
tion setting that cannot be used for printing, then a dialog box will open and prompt you to
change the resolution. If this occurs, click the OK button to cancel the print job and then lower
the resolution.
• A message from AutoCAD is displayed when printing starts. Press the OK button to execute the
print job. This message display can be disabled with the Options setting in the AutoCAD Tools
menu. For more details, please refer to the AutoCAD manual.
iPF755