Canon iPF755 User Manual page 693

Sys-
Language
tem
Time Zone
Setup
Length Unit
Detect Mismatch
Paper Roll Selection 1
Size
Basis
Roll Selection 2
Keep Paper Size
TrimEdge Reload
iPF755
Setting Item
Printer Parts
Description, Instructions
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area, and so on.
Specify printing behavior if the type and size of pa-
per specified in the printer menu does not match
the type and size in the printer driver.
Choose Pause to have printing paused under these
circumstances. Choose Warning to continue print-
ing after notification. Choose None to continue
printing without notification. Choose Hold Job to
store jobs with mismatched types and sizes of pa-
per on the printer hard disk, in a print queue await-
ing processing. (See "Using the Printer Hard
Disk.")
→P.528
If roll size detection is activated, choose whether
ISO A3 (297mm) or 300mm Roll is applied when
a roll of an intermediate width is detected.
If roll size detection is activated, choose whether
10in. (254mm) or JIS B4 (257mm) is applied
when a roll of an intermediate width is detected.
Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin
setting of the printer menu will be used instead of
the margin setting of the printer driver if the latter
is smaller, which may prevent text or images in the
margin from being printed.
Choose Off to give priority to margin settings. The
larger value is used if the margin specified in the
printer driver does not match the margin in the
printer menu
Specify whether to trim the leading edge of the cur-
rently retracted roll when the roll is advanced. Cut
the edge if you are concerned about any marks left
on the roll when the roll is left in the retracted posi-
tion.
> Control Panel >
9
677
Menu Settings